Beurer BY 70 Mode D'emploi page 28

7. If you want to switch back to stimulation mode, press the
button. The stimulation and the two-minute timer will start
from the beginning.
The breast pump has a memory function, which recalls
the last programmed stimulation or pumping level when
it is switched on.
Please note: the one-sided pump mode "1" or dual pump
mode "2" will also be stored. For dual pump mode "2", the
adapter for two-sided pumping must be connected to the
motor unit.
8. To switch off the breast pump, press the
7.3 Operating the breast pump
b) Preparation for one-sided pumping:
1. Before using the breast pump, wash your hands and breasts
thoroughly.
2. The breast pump must be connected to the silicone tube for
one-sided pumping and to 1 small bottle.
3. Sit with your upper body lent forwards slightly. You can support
your back better by using a pillow.
4. Place the breast shield with silicone cushion gently on the
breast. Make sure that the nipple is completely enclosed and
there are no air pockets. To ensure proper function, the breast
shield must be drawn firmly onto the breast.
button.
28
5. Back to stimulation mode