LD Systems DEFENDER Série Manuel D'utilisation page 20

DEFENDER OFFICE
The 4-channel Defender Office meets all requirements and guidelines (pursuant to Sec. 3 A1 of the German
Work Safety Regulations) for professional cable protection, whether in offices, in your conference room or at your
trade fair booth. You can adapt the length of the cable crossover and the 90° curve to your individual needs at
any time. Like the COMPACT with BASE, this cable protector consists of two parts. Unlike all other crossovers,
however, this solution does not have any connectors. In order to run a fixed line, the lid must be attached with an
offset of approx. 10 cm in relation to the base. In this manner, the lid functions as a connector. The bases and lids
can be shortened individually in increments of 10 mm. Both parts are marked with corresponding lines. Please
follow these markings to ensure trouble-free functioning.
OFFICE
Safe load: ca. 1t on a surface area of 20 x 20 cm.
Office crossover - can, however, also be driven over by vehicles.
Range of application: Conceivably for all applications, but not very stable in a line, thus preferred applications
are in offices, at trade fairs, etc.
85160
20
SERIES
870 x 110 x 20 mm
85160YEL
Weight: 1.5 Kg
85160GREY