Listening To Wireless Headphone; Functional Overview - Philips SBC HD1505U Mode D'emploi

10 ENGLISH

Listening to Wireless Headphone

• Switch on the wireless headphone.
The system status light will be illuminated in green.
• The headphone will tune automatically to the most recently used
transmission channel.
• In case the headphone does not tune properly to the transmitter, then
press the tuning button.
• Adjust the volume to the desired level with the headphone volume
control.
• For Bass and Treble enhancement, press the buttons on the right earshell
of the wireless headphones. Pressing repeatedly will activate/deactivate
the Bass and Treble enhancement.
Important!
Adjusting the volume control and DBE button on the base station has no
impact on the HD1505U wireless headphones.These functions only work
with corded headphones. (not included)

Functional overview

1 POWER
– Power on the headphone by pushing the Power button.
– Power status is indicated by SYSTEM STATUS light
2 TUNE
Automatic transmission channel search by pushing the button
3 SYSTEM STATUS indicator
The SYSTEM STATUS indicator on the control panel will indicate the status
of the headphone by means of different colors and different blinking modes.
Some of these modes also have an audible alarm.