Replacing Ink Cartridges - Epson Stylus NX330 Guide Rapide

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin. You must install new cartridges
immediately after removing the old ones.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Note: Leave the expended cartridge installed until you have obtained a replacement, or
the ink remaining in the print head nozzles may dry out.
1. Turn on your printer.
2. If an ink cartridge is expended, you see a message on the LCD
screen. Note which cartridges need to be replaced and press
.
OK
If a cartridge is expended, you must replace it to be able to
print. If a cartridge is low, you can continue printing until a
cartridge needs replacement.
If you're replacing a cartridge before you see a message on the
LCD screen, press
, then select
Maintenance
press .
OK
3. Lift up the scanner.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it
carefully. Do not take the used cartridge apart or try to refill
it.
Warning: If ink gets on your skin, wash it off with soap and
water. If ink gets in your eyes, flush them immediately with
water. If it gets in your mouth, spit it out and see a doctor
right away.
if necessary and select
Ink Cartridge Replacement
. Select
F Setup
and
Replacing Ink Cartridges
19