Camera Settings - Nikon DSA-N1 Mode D'emploi

DSA-N1 dismounting method
En
1) Loosen the mounting screw for DS eyepiece, and pull out the adapter from the eyepiece.
2) Turn and pull out the adapter while pressing the lens release button on the front side of the
camera.
Applicable models
(as of September 2012)
Applicable cameras:
Nikon 1 V1, Nikon 1 J1, and Nikon 1 J2
Applicable firmware:
• Nikon 1 V1
- A: Ver.1.20 or later
- B: Ver.1.20 or later
• Nikon 1 J1
- A: Ver.1.20 or later
- B: Ver.1.20 or later
Applicable fieldscopes:
EDG85 VR/EDG85-A VR/EDG85/EDG85-A/EDG65/EDG65-A/ED82/ED82-A/EDIII/EDIII-A/III/III-A/
ED50/ED50-A
22
Applicable eyepieces:
FEP-20W, FEP-30W, FEP-38W, and FEP-50W
16× wide/24× wide/30× wide DS
27× wide/40× wide/50× wide DS
* For the latest information on the applicable cameras, firmware, fieldscopes, and eyepieces, refer
to Nikon's website.

Camera settings

Exposure mode:
[A Aperture-priority auto] or [M Manual] is available. [Scene auto selector], [P Programmed auto],
or [S Shutter-priority auto] is not available.
Exposure:
• It is recommended to set [Metering] to [Center-weighted]. Optimal exposure may not be ob-
tained if [Matrix] or [Spot] is set.
• The Digiscoping System differs in optical properties from interchangeable lenses. Therefore, the
exposure level may vary with each camera. Make exposure compensation if necessary.
En
23