Wet Vacuuming Operation; Dry Vacuuming Operation; Blower Operation - Flex FX5221 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WET VACUUMING OPERATION

WARNING
operation.
a. Remove all dirt and debris found in the
canister.
b. Turn on the vacuum with the On/Off switch
and begin vacuuming.
c. Turn off the vacuum immediately upon
completing a wet vacuuming job or when the
canister is full and needs to be emptied.
d. Remove the battery pack and lift the head
unit.

DRY VACUUMING OPERATION

Make sure the filter is completely dry after
wet vacuuming or use a second dry filter set
for dry vacuuming. Damp or wet filters will get
clogged with dust or get moldy.
To reduce exposure to silica dust, use dust
bag.
a. Turn on the vacuum with the On/Off switch
and begin vacuuming.

BLOWER OPERATION

WARNING
Always wear eye protection when using
this appliance as a blower.
Do not blow flammable or combustible
materials such as gasoline or use in areas
where such materials may be present. Fire
could result.
Do not point the airflow in the direction of
people or pets.
a. Remove all dirt and debris found in the
canister.
Do not use the dust bag
during wet vacuuming
e. Pour the liquid waste out into a suitable drain.
f. Clean the interior of the canister, the filter, and
accessories periodically, more often when
used to pick up wet, sticky materials. Use
warm, soapy water.
Use a dry filter for subsequent dry
vacuuming. We recommend purchasing an
extra filter when frequently alternating between
wet and dry vacuuming and swap them out as
needed.
To prevent mold formation, completely dry
the filter and the dust container.
b. Turn off the vacuum immediately upon
completing a job or when the canister or dust
bag is full.
CAUTION
silica dust from concrete drilling), special
care is needed when removing filled dust
bag.
b. Turn on the vacuum with the On/Off switch
and begin blower operation.
c. After using, clean up! Dispose of debris
properly.
To prevent the debris from scattering, blow
around the outer edges of a debris pile. Never
blow directly into the center of a pile.
To reduce sound levels, limit the number of
pieces of equipment used at any one time.
Watch out for children, pets, open windows,
or freshly washed cars, and blow debris safely
away.
-17-
To reduce exposure to
airborne dust (especially

Publicité

Table des Matières
loading

Table des Matières