Flex FX5221 Manuel De L'utilisateur page 13

USING DIFFERENT NOZZLE (FIG. 7)
All of the nozzles shown can be mounted
onto the nozzle pipe. The nozzle pipe can be
removed from vacuum hose by pressing the
release buttons and pulling the nozzle pipe out.
USING THE POWER-TOOL ADAPTER (FIG. 8)
The power-tool adapter makes it easy to
connect the vacuum to a power tool with a
1-1/4" dust outlet.
Connect one end of the adapter to the nozzle
pipe, and the other end to the dust outlet of the
power tool.
USING THE SHOULDER STRAP (FIG. 9)
To use the shoulder strap, insert one snap hook
into the loop above the suction opening and
the other into the loop at the end of the handle.
Carry the vacuum cleaner as shown in Fig. 9.
Fig. 7
Fig. 8
Power-tool adapter
Fig. 9
-13-
Release buttons
Loops