Genie B 5211 Mode D'emploi page 10

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

➩ Allow the appliance to cool down completely.
➩ Clean the surface of the housing with a slightly damp wash cloth.
➩ Ensure that moisture cannot permeate into the appliance.
Data Technical
Mains voltage:
220-240VAC/50Hz
Nominal power: 250W
Rated current:
1.2 A
Warm-up time:
approx. 3mins
Protection class:
Binding capacity: max. 300 sheets with a 30mm thermal binder cover
HANDLING THE GUARANTEE
Thank you very much for purchasing this GENIE product. Please note the following advice whenever this
machine does not function faultlessly, contrary to expectations.
The guarantee period amounts to 24 months from the date of purchase, provided that the machine has been
used appropriately. Please keep the proof-of-purchase voucher and original packaging in a safe place. The
warranty is only valid for defects in materials or fabrication. However, it is invalid for damage that has occurred
to breakable parts, e.g., on the casing. Machines that have been damaged by inappropriate use externally,
are excluded from being exchanged. A guarantee will expire whenever any repairs have been carried out
without the express consent of our customer service department.
Repairs under the guarantee can only be made when the proof-of-purchase voucher is enclosed with the
defective machine – please notify us about the return by telephone! Please give your name, address,
post code, town and telephone number with the dialing code. Please state the reason for your complaint too.
We regret any inconvenience caused!
Our service hot line
Tel. +49 (0) 6122-7279891 ● Fax +49 (0) 6122-705952 ●
E-mail: hotline@genie-online.de
Address: GENIE GmbH & Co. KG, -Service- , Berta-Cramer-Ring 22,
D-65205 Wiesbaden. Deutschland/Gemany
Guideline 2012/19/EU concerning the handling, collection, recycling and disposal of electrical
and electronic equipment and their components ('waste electrical and electronic equipment',
known as WEEE).
The crossed symbol on a rubbish container indicates that the machine or device is not allowed to be
disposed of but it must be handed over to a suitably equipped collection centre for proper recycling or
disposal.
We declare that this device has been manufactured in accordance with the applicable rules
and regulations.
II
max. sheet size - DIN A4

Publicité

Table des Matières
loading

Table des Matières