Operation; Switching The Device On And Off; Automatic Sensor Cleaning (Asc) - Hama MW900 Mode D'emploi

Operation

Switching the device on and off

u To switch the device on, press the
it down for approximately 3 seconds.
u To switch it off, press the

Automatic sensor cleaning (ASC)

NOTE
► Perform the automatic sensor cleaning process:
– before the device is used for the first time and
– if the device has not been used for a long
period of time (at least a week).
When the device is used for the first time, ASC begins
automatically once the batteries are inserted.
u Hold the cleaning cap (included in delivery).
u Apply approximately 3-4 drops of alcohol to the
cleaning cap and place it onto the mouthpiece (1).
MW-900
button (5) and hold
button (5) briefly.
GB
33