Installation In Detached Houses With 2 Points Of Entry (2 X 1 Dwelling Kit) - Alcad GRF-200 Mode D'emploi

D I G I TA L V I D E O D O O R E N T R Y S Y S T E M S

INSTALLATION IN DETACHED HOUSES WITH 2 POINTS OF ENTRY (2 x 1 DWELLING KIT)

- SINGLE-WIRED DIAGRAM -
SECTION TABLE 1 DWELLING KIT 1 DWELLING KIT
Up to 100 m -
W
Up to 25 m -
Main entrance panel Secondary entrance panel
Operation -
MAKING A CALL. SYSTEM ACTIVATED.
Both monitors receive the call simultaneously, emitting an alert signal and turning on the screen. You are allowed a certain period of
time to answer. Once this period has expired, the system reverts to being on standby. When the receiver of one of the monitors is
picked up, communication will be established with the entrance panel, thereby starting the time allowed for communication. During
this period of time, you can open the door from the monitor. If this feature is enabled, you will be able to hear the door-opening tone
(J2 jumper in place). You can also extend the conversation time (see page 4). If you pick up the receiver of the other monitor, you will
hear beeping tones. When the time allowed for conversation expires, or when the user hangs up the receiver, the system reverts to
being on standby.
Note: You will find the time-settings of the system on page 3.