Dualrate Function D/R - Reely SKY Exceed Notice D'emploi

b) Dualrate Function D/R
With the help of the dual rate function, the available servo path
can be limited or enlarged again. This function is already used
when switching the control sensitivity. For switching to work
permanently and correctly in full, the factory setting „HALF" must
remain activated in the D/R menu.
For this reason, the D/R-value in the programming menu can be
selected and changed from „HALF" to „FULL", but it is not possible
to save the change.
Therefore, this menu item does not need to be called in practice.
Figure 20
56