System Settings; Care Of The Environment - THOMSON CR50DAB Mode D'emploi

System settings

Your Radio must be switched on (not in Standby mode), to change the system settings.
Display backlight timeout
You can adjust the display backlight timeout. The options OFF, 10, 20, 30, 45, 60, 90, 120, and 180
seconds are available.
In DAB or FM mode:
1) Press and hold the Menu/Info button to enter the menu options.
2) Use the TUNING+/TUNING- button to scroll to '<System>'. Press the SELECT button to select.
3) Use the TUNING+/TUNING- button to scroll to '<Backlight>'. Press the SELECT button to select.
4) '<Timeout>' is displayed. Press the SELECT button to select. Use the TUNING+/TUNING- button
to scroll through the available backlight timeout options of OFF, 10, 20, 30, 45, 60, 90,120 and 180
seconds. Press and release the SELECT button to select.
Software version
You can check the software version of your radio.
In DAB or FM mode:
1) Press and hold the Menu/Info button to enter the menu options.
2) Use the TUNING+/TUNING- button to scroll to '<System>'. Press the SELECT button to select.
3) Use the TUNING+/TUNING- button to scroll to '<SW Ver>'. Press the SELECT button to select.
The software version will be displayed.
Factory reset
You can reset your radio and restore all of the original factory settings.
Note: If you reset your radio all of your stored station presets will be deleted.
In DAB or FM mode:
1) Press and hold the 'Menu/Info' button to enter the menu options.
2) Use the TUNING+/TUNING- button to scroll to '<System>'. Press the SELECT button to select.
3) Use the TUNING+/TUNING- button to scroll to '<RESET>'. Press the SELECT button to select.
4) 'Reset <N> Y' will be displayed. Use the TUNING+/TUNING- button to scroll to '<Y>'. Press the
SELECT button to select.
5) After a few seconds the display will change to 'Welcome' and will then go into standby mode.
Adaptor specification
Adaptor Input:
Output:
Frequency ranges:
Under the environment with electrostatic discharge, the device may be power off. (EUT could not
operate properly). It requires user reset the device by turn on the device to choose the appropriate
mode & set time again.

Care of the environment

Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
Attention should be drawn to environmental aspects of battery disposal.
220-240V~50/60Hz 15A MAX.
DC 5V 1A
FM: 88.8 – 108Mhz / DAB: 174 – 239MHz
- EN 8 -