During Operation; Function Interruption; End Of Programme; Energy Saving - Teka MWX 22 BIS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

During operation...

During the cooking process, you may open the
door at any moment, as:
• THE PRODUCTION OF MICROWAVES IS
IMMEDIATELY INTERRUPTED.
• The grill is deactivated and remains at a high
temperature.
• The timer stops and the screen shows the
operating time that is left.
If you wish, you may:
1. Turn around or move the foods to ensure
uniform cooking.
2. Change the power of the microwave, using
the "–" and "+" buttons.
3. Select another function, using the function
buttons.
4. Adjust the operating time that is left, by using
the ROTATING BUTTON.
Close the door again and press the start button.
The appliance will start to function again.

Function interruption

To interrupt the programme, press the STOP
button or open the door of the appliance.
If you wish to cancel the cooking process, close
the door again and press the STOP button. The
oven will beep and the screen will display the
time.

End of programme

When the programme is finished, the microwave
beeps 3 times and the screen displays "End".
The beeps are repeated every 30 seconds, until
the door is opened or the "STOP" button is
pressed.

Energy Saving

This microwave oven has a special energy
saving mode which is automatically activated at
the end of a ten-minute period of inactivity.
In the energy saving mode, all keys are switched
off and the Display only show two dots which
flash every ten seconds.
The clock may be displayed at any time by
pressing the START key.
The energy saving mode is immediately
deactivated when a function key is pressed.
EN
37

Publicité

Table des Matières
loading

Table des Matières