Reversing The Door(S) - Vestfrost SW 350 M Mode D'emploi

Reversing the door(s)
The door(s) can be changed from right-hinged to left-hinged and vice versa as follows:
1. Remove upper hinge. The hinge will be
reused later as the upper hinge on the
opposite side. Lift off upper door.
4. Move hole cover to opposite side of kick
plate and refit kick plate to appliance.
2. Remove middle hinge. Lift off lower
door. Refit hinge screws.
5. Door adjustment (top): Loosen the two
screws holding the upper hinge in place
and turn the hinge to right or left as
required. Retighten the screws.
7
3. Remove kick plate. Remove lower
hinge by unscrewing the three screws.
Rotate hinge through 180° and refit on
opposite side.
6. Move handles to opposite side of doors.
Refit plugs in holes on opposite side of
doors.
GB