Beem Pro-Multi-Grill 3 in 1 Mode D'emploi page 28

Pro-Multi-Grill 3 in 1 V2
Use the temperature regulator (7) to
‹
set the desired temperature depend-
ing on the food (see section tempera-
ture regulator; page 22).
Allow the appliance to heat up after
‹
switching on. The operating tempera-
ture is reached in approx. 8 minutes
when the lid (2) is closed.
When the standby indicator (4) lights
‹
up, the preset temperature has been
reached and grilling can start.
NOTE!
► The temperature settings can be
changed at any time during grilling.
Using as a contact grill or sandwich
toaster
Switch on the appliance as described
‹
in the section Operating the appli-
ance: Switching on (page 25).
Open the lid (2).
‹
Put the food onto the lower grill plate
‹
(15).
Close down the lid (2).
‹
Grill the food until it is browned or
‹
cooked as desired.
26
Using as an open grill
Fold up the lid (2) completely as de-
‹
scribed in the section Folding up the
lid (page 24).
Switch on the appliance as described
‹
in the section Operating the appli-
ance: Switching on (page 25).
Put the food onto both grill plates.
‹
Grill the food until it is browned or
‹
cooked as desired.
NOTE!
► Regularly turn over food to ensure
even cooking; if possible, only turn
over fish and meat once to avoid
drying it out.
Using the spacer
Set the desired gap as described in
‹
the section Setting the gap (page
24).
Switch on the appliance as described
‹
in the section Operating the appli-
ance: Switching on (page 25).
Open the lid (2).
‹
Put the food onto the lower grill plate
‹
(15).
Close down the lid (2).
‹
Grill the food until it is browned or
‹
cooked as desired.
Switching off
Push the temperature regulator (7) to
‹
" ".
Move the ON/OFF switch (5) to the
‹
"O" position. The power indicator (6)
and the standby indicator (4) go out.
Allow the appliance to cool down com-
‹
pletely.
BEEM - Elements of Lifestyle
EN