The Tube's Fastening; Additional Clamping Jaws - AXXAIR CC122 Notice Originale

INNOVATIVE ORBITAL SOLUTIONS

10. The tube's fastening:

Warning: It is extremely important, so that the machine will not be damaged, to support the tube both in
front and behind when it extends beyond the machine for more than 500 mm or if there is an overhang
weighing more than 25 kg.
Good alignment between the fastening of the tube and the machine guarantees the cut's perpendicularity.
The alignment between the cutting machine and the fastening system for the cut tube avoids pinching the
tool and therefore guarantees its longevity.

11. Additional clamping jaws:

In order to increase the tightening capacity of the cutting machines, additional clamping jaws are provided
as a standard.
Cutting Machine
CC122
CC172
CC222
CC322
Join experience
ENGLISH
Basic clamping jaws
24 to 120 mm
70 to 170 mm
116 to 225 mm
257 to 330 mm
SAS au capital de 135 720 € - RCS Romans B414 581 363 – Code APE 2841 Z – Siret 414 581 363 00028 – TVA FR13414 581 363
Machine capacity in mm
Additional clamping jaws 1
5 to 108 mm
16 to 118 mm
59 to 172 mm
197 to 270 mm
330B Route de Portes Les Valence - ZI Les Bosses - 26800 Etoile sur Rhône
Tél: +33 475 575 070 - Fax: +33 475 575 080 - commerce@axxair.com - www.axxair.com
- 19 -
Additional clamping jaws 2
/
/
/
140 to 210 mm