Outdoor Play 0710021 Mode D'emploi page 2

Required tool (not included): Adjustable wrench
1. The swing consists out of 4
parts, 2 ropes and the swing
mat.
5. Slide the 2nd tube through
the cover and connect it with the
1st tube.
9. Ensure there is enough space for
later fixing the turning bolt to the
frame.
13. Finish the fixation with a
wrench.
2. Place the swing mat on the ground
and place the 4 Velcro tapes like
shown on the photo.
6. Repeat and form a half circle, like
on the photo.
10. Fix the turning bolt to the frame.
14.Repeat this 3 times .
OUTDOOR
P L A Y
3. Slide the metal tubes with
foam into the covers, as shown
on the photo.
7. Repeat the steps until a circle is
formed.
11. Fix it firmly with the turning nut
15. End result
4. Place the tubes like shown.
8. Pull the turning bolt, which is fixed
to the rope, through the fabric
12. Tighten with a wrench.