Electrical Connection; Commissioning; Initial Start-Up; Appliance Handover - Stiebel Eltron FEK 2 Utilisation Et Installation

INSTALLATION | guARANTEE | ENVIRONMENT ANd RECYCLINg

Electrical connection

10.2.3 Installing the wall mounted enclosure
1 Flush box
f Secure the wall mounted enclosure to the flush box or to f
the wall using the screws provided.
11. Electrical connection
Material losses
Be sure to get the polarity right on the appliance and
on the heat pump manager.
X2
A1
A1 WPM heat pump manager
A2 FEK 2 remote control
A3 Heat pump
3
1 Appliance
2 Wall mounted enclosure
3 6-pin female connector
FEK 2
A3
A2
1
2
f Connect the data cable to the female connector.
f
f Connect the female connector to the back of the appli-
f
ance.

12. Commissioning

1

12.1 Initial start-up

Once the appliance has been connected to the heat pump
manager, the commissioning assistant is launched. The com-
missioning assistant will guide you through the most impor-
tant basic settings.
f Select the heating circuit for which the appliance is re-
f
sponsible. You can also assign the heating circuit from
the heat pump manager (SETTINgS / HEATINg / REMOTE
CONTROL / HEATINg CIRC PRESELECTION).

12.2 Appliance handover

f Explain the appliance function to users and familiarise
f
them with how it works.
Note
Hand over these operating and installation instruc-
tions to the user for safe-keeping. All information in
these instructions must be closely observed. The in-
structions provide information on safety, operation,
installation and maintenance of the appliance.

13. Specification

13.1 Data table

Height
Width
depth
Setting range

Guarantee

The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not affect warranties issued by any importers.

Environment and recycling

We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
FEK 2
200168
mm 97
mm 147
mm 33
K ± 5
| 15