Cleaning - ADE CM 2100 Mode D'emploi

‚ For best results, keep the motor running at full speed
and do not apply pressure that may brake it. Reduce
pressure if the motor is braked too hard.
Select and pay attention to the direction of rotation
‚ The correct direction of rotation depends inter alia on
which hand you use the device with.
‚ Choose the direction of rotation so that the nail dust is
moved away from you.
‚ When handling nail edges, choose the direction
of rotation so that the nail is not pulled up by the
rotating attachment.
Do not remove too much skin
‚ You should not bathe your feet before the pedicure.
Due to softened skin there is a risk that you will
remove too much of it. Bathe your feet after the
procedure.
‚ Do not remove calluses completely; always leave a bit
of callus to protect the skin.

Cleaning

Electric shock HAZARD
‚ The device and the network adapter cable
1. Switch off the handset and pull the mains adaptor out
of the power socket and the socket plug out of the
handset.
2. Allow the handset to cool down.
Electric manicure/pedicure set CM 2100
or network adapter plug must not come
into contact with liquids or be submerged
in water or other liquids.
39