Use; Inserting The Attachment And Connecting The Handset; Switching On And Operating The Handset - ADE CM 2100 Mode D'emploi

Use

Inserting the attachment and connecting the
handset
1. Make sure the handset is switched off.
2. Select the desired attachment
(see "Choosing the right attachment").
3. Insert the attachment into the handset
(see "Overview").
If necessary, turn it slightly until it fits into the holder.
The attachment clicks into place.
4. Insert the socket plug of the mains adaptor into the
connection socket of the handset.
The plug clicks into place.
5. Plug the mains adaptor into the power socket.
The device is ready for use.

Switching on and operating the handset

NOTE - Risk of damage
‚ Use the handset for a maximum of 10
Switching on and selecting the direction of rotation
− Switch on the device by setting the slide switch to
R (clockwise) or L (counter-clockwise).
The device runs at the lowest level 1. The LED light
goes on.
Electric manicure/pedicure set CM 2100
minutes at a time and then allow it to cool
down for at least 10 minutes to prevent
motor from being overloaded.
37