Switching Off; Tips For An Optimal Result - ADE CM 2100 Mode D'emploi

Selecting speed
− Increase speed: Repeatedly press the + button
− Decrease speed: Repeatedly press the - button
Note the speed indicator (1-5).

Switching off

− Set the slide switch to 0.
When the device is switched on again, it always
starts at the lowest speed 1, even if it was
previously running at a higher speed.

Tips for an optimal result

The following tips and information should help you to
achieve the best possible result.
Take your time
‚ Take your time, especially if you have never used the
device before. Check the result again and again by
stroking the nail surface.
‚ Also take a short break from time to time and check
the result.
Use little pressure
‚ Always bring the attachments to nails without
pressure.
‚ Then guide the handset and attachment with circular
movements and low pressure. This protects the motor
and attachments and prevents the parts of the body
under treatment from heating up.
38
Electric manicure/pedicure set CM 2100