Application Examples; Environmental Protection; Spare Parts - Würth MLL12 Traduction Des Instructions De Service D'origine

Application examples

Levelling, projecting points / vertical
lines
Level the laser to the required height.
Mark the points on the laser line or project the
required height using a metre rule.
Plumbing
If you want to project a point from the ceiling onto
point to be projected and mark the other side.
Projecting 90° angles
Switch on the vertical lines. Position the plumb beam
above the corner point. Align the vertical laser line
mark the required points on the other vertical lines.
Noise
The A-rated sound pressure level of the acoustic
Do not hold the measuring tool closely to your ear!
Maintenance / Care
Do not use aggressive cleaning agents or solvents.
Clean the laser windows with a soft cloth.
In the unlikely event of a failure or defect, have the
customer service point for Würth power tools.
In all your queries and spare part orders, always
quote the 10-digit product number (see type plate)
of your device.
16

Environmental protection

Do not dispose of the device with
domestic waste. Dispose of the
device only via an authorized waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmentally
friendly manner.
Batteries may not be disposed of with domestic
waste. Hand in used batteries at your supplier or at
a battery collecting point.
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognized only if the device is in a
non-disassembled state and presented to a Würth
Technical changes reserved.
We accept no liability for printing errors.

Spare parts

In the unlikely event of a failure or defect, have the
terService workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.
The current spare parts list of the device can be
viewed online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
-