Explanation Of Symbols; Operating Instructions; Overview; Using The Quick-Plug Charging Cable - EAL APA 16496 Manuel De L'opérateur

5. EXPLANATION OF SYMBOLS

In accordance with EC guidelines
Labelled electrical product may not be
disposed of in the household waste
Devices with this label may only be operated
indoors (dry enviroments)
Protective
insulated housing
(protecion class II)
Recommended battery capacity
Read Instructions
Corresponds to the requierements of § 21 of
the German Product Safety Act (ProdSG)

6. OPERATING INSTRUCTIONS

Before using the device make sure that you have
read the operating instructions for the battery and
the vehicle and you have understood all of the safety
precautions.

6.1 OVERVIEW

Fuse, here:
1.0 A
Figure 1: View of front Figure 1: View of front
1 Selection switch for battery voltage
2 Control lamp – 6 V mode
3 Control lamp – 12 V mode
4 Control lamp for error
5 Mains connection cable
6 Charging cable with quick-plug system
7 Quick-plug charging cable with pole callipers
8 Quick-plug charging cable with eyes

6.2 USING THE QUICK-PLUG CHARGING CABLE

The quick-plug charging cable with pole callipers
(Position 7 in the overview) is used if you wish to
connect the charger in the classic way to the poles of
the battery. The quick-plug charging cable with eyes
(Position 8 in the overview) is designed to remain
fi rmly attached to a battery which is diffi cult to access.
The charger can be conveniently connected using the
quick-plug connection.

6.3 PREPARATION

Clean the battery poles to remove dust and corrosion
residue.
Only for open batteries: Remove the plugs of the
battery cells. Check the liquid level in the cells, consult
the operating instructions of your battery for more
information. Replenish only suffi cient distilled water
to ensure that the minimum fi lling level is achieved.
The liquid will expand during the charging process
and the battery may overfl ow. Leave the cells of the
battery open until the end of the charging process. In
case of closed and maintenance-free batteries, please
follow the instructions of the battery manufacturer to
the letter.

6.4 CONNECTING THE BATTERY CHARGER

6.4.1 CONNECTING THE ADAPTER CHARGING

CABLE WITH POLE CALLIPERS

CAUTION
Make sure that the charger is not connected
to the power socket and that the adapter
charging cable is not connected to the bat-
tery charger.
Always connect the red plus cable (+) to
the positive pole of the battery fi rst. Subse-
quently, connect the black minus cable (-)
to the negative pole of the battery. If you
charge the battery in situ, connect the black
9