RM SPB - 704 G Notice D'installation Et D'emploi page 10

10
1
2
3
4
5 - inside
6
Item list:
1- Burner pipe
2- M5x16 IMBUS brand screw
3- Nozzle bracket
4- Supply pipe - copper
5- Burner nozzle
6- Gas cock
Procedure for replacing the nozzle:
1) Loosen the M5x16 IMBUS brand screw (position 2)
2) Move the nozzle bracket (position 3) downwards
3) Use the spanner to unscrew the nozzle (position 5) and replace it with the required size
4) Move the nozzle bracket upwards to distance H
5) Tighten the M5x16 IMBUS brand screw
Distance H is the nominal dimension in mm between the nozzle bracket and the burner pipe
(position 1). Values are verifi ed by the test institute