Reversing Door - Kenmore 253.20202 Guide D'utilisation Et D'entretien

First Steps

Reversing Door

Tools required: Phillips screwdriver, flat
head screwdriver, hexagonal spanner.
• Two people should handle assembling
the unit.
• Ensure the unit is unplugged and empty.
• To take the door off, tilt the unit
backwards. Rest the unit on something
solid so it will not slip during the door
reversing process.
• To prevent damaging the coolant
system, do not lay the unit flat.
• Save all parts to reinstall the door.
1. Remove 2 screws at rear side of
top cover.
Unscrew
2. Remove top cover and Temperature
Control dial. Place it aside.
1
2
1
3. Unscrew top hinge. Remove door
and place it on a soft pad to avoid
scratching.
4. Unscrew bottom hinge. Remove
leveling legs from both sides.
5. Unscrew and remove bottom hinge
pin, turn bracket over, and replace it.
Unscrew
6. Refit the bottom hinge to the
opposite side. Replace both
leveling legs.
6
Screw