Alecto WS-3800 Guide De L'utilisateur page 41

WIND SPEED
6.6 RAIN MEASUREMENTS: WINDCHILL
The display shows the following rain measurements:
TOTAL
TODAY
RAINFALL
Total:
This shows the total amount of rainfall from the beginning (last reset or battery placement) until now.
Press the "RAIN SINCE" button to check the starting date.
Today:
m
A
This shows the rainfall of today (the last 24 hours).
m
P
SINCE
Rain History:
m
A
Press the "RAIN HISTORY" button to view the rainfall history up to 30 days ago. The history disappears from
m
P
the display after 15 seconds without pressing any button.
SINCE
To delete the rainfall data:
Press and hold the "RAIN CLEAR" button for 2 seconds to delete the rainfall data.
Rainfall alert function:
When a certain amount of rain has fallen, the weather station can be set to emit an acoustic alert signal.
To set the rainfall alert:
press and hold the "ALERT RAIN" button for at least 2 seconds.
"HI" starts flashing. Use the ▼ and ▲ buttons to select the desired rainfall alert level and press the "ALERT
RAIN" button to confirm the value.
press the "ALERT RAIN" button to activate or deactivate the rainfall alert ("HI" appears in the display when
the rainfall alert is enabled).
WIND GUST
The alert starts as soon as the rainfall level is reached.
Press any button to stop the alert (the "HI" icon remains flashing).
WIND GUST
6.7 TEMPERATURE:
TOTAL
Indoor:
Indoor temperature with humidity (when the humidity is below 20%, the
TOTAL
Outdoor:
Outdoor temperature with humidity (when the humidity is below 20%, the
TODAY
The display shows LL.L or HH.H when the temperature is outside the value that can be measured.
DAYS
TODAY
Outdoor temperature alert function:
When the outdoor temperature becomes Higher or Lower than certain values, the weather station can be set
DAYS
to emit an acoustic alert signal.
This can be set for when the temperature falls below a certain value, when the temperature rises to above a
certain value or when the temperature is below and above a certain value.
To set the temperature alert:
press and hold the "ALERT OUT TEMP" button for at least 2 seconds.
"HI" starts flashing. Use the ▼ and ▲ buttons to select the desired high temperature alert and then press
the "ALERT OUT TEMP" button.
"LO" starts flashing. Use the ▼ and ▲ buttons to select the desired low temperature alert and then press
the "ALERT OUT TEMP" button to save your settings.
press the "ALERT OUT TEMP" button to choose:
The alert is active when one of the icons is selected.
The alert starts as soon as a set value is exceeded.
Press any button to stop the alert (the alert icon remains flashing).
WIND DIRECTION
OUTDOOR
24HR
m
AX
INDOOR
mm
mm
OUTDOOR
MODE RAIN SINCE
RAIN CLEAR
SET RAIN HISTORY AL ON/OFF
m
m
D
D
WIND SPEED
WINDCHILL
WIND SPEED
WINDCHILL
Hi
m
AX
Hi
RAINFALL
m
AX
RAINFALL
D
D
m
m
Hi
Hi
KNOTS
m
K /H
m
PH
m
/S
KNOTS
WIND DIRECTION
m
K /H
m
PH
OUTDOOR
m
/S
24HR
m
AX
WIND DIRECTION
m
IN
OUTDOOR
24HR
m
AX
m
IN
INCH INDOOR
mm
INCH INDOOR
mm
Hi
INCH
mm LO
OUTDOOR
Hi
INCH
mm LO
MODE
OUTDOOR
SET RAIN HISTORY
MODE
SET RAIN HISTORY
"HI" high temperature alert
"HI-LO" high and low temperature alert
"LO" low temperature alert
41
FORECAST
m
B/
HPA
mm
FORECAST
HG
INHG
BAROMETER-ABSREL
m
B/
HPA
mm
HG
INHG
BAROMETER-ABSREL
icon appears).
icon appears).
RAIN SINCE
AL ON/OFF RAIN CLEAR
RAIN SINCE
AL ON/OFF RAIN CLEAR