Kicker IQ Série Mode D'emploi page 8

Features & Operation
PWR
1000.1
The IQ-Series is unlike any amplifi er on the market today. It is fully
functional using the analog end panel controls, but unlocks its full
potential when the DSP (Digital Signal Processor) is taken advantage
of. We recommend familiarizing yourself with the following controls.
AUTO TURN-ON: Set the switch to +12V to use the remote
turn-on lead from your source unit. Run 18 gauge wire from the
Remote Turn-On Lead on your source unit to the terminal labeled
REM between the amplifi er's positive and negative power terminals.
The DC Offset mode detects a 6V DC offset from the HI-Level
speaker outputs when the source unit has been turned on. The
Audio setting detects the incoming audio signal from your source
unit and automatically turns on the amp. Using either the DC Offset
or Audio mode causes the REM terminal to have a +12V out for
turning on additional amplifi ers.
8
2015 IQ Quick Start Rev C.indd 8 2015 IQ Quick Start Rev C.indd 8
PANEL
LOCK
0 11 40 180 0 18
Hz dB
GAIN X-OVER KICK
TM
EQ
GUI
12/4/2014 1:29:54 PM 12/4/2014 1:29:54 PM