Urmet 1092 Manuel D'installation page 8

CAMERA WALL MOUNTING

After finding the point that meets all requirements for a correct installation, use the black support
bracket like a "drilling template", taking care to mark the position of the 4 holes to be made on
the support surface.

Below are indicated the hole interaxis and the dimensions of the bracket support base.

Make the holes on the support surface, then fix tightly the black bracket using the provided
44mm screws.

Place the silicone moulded gasket Ø125 mm inside the bracket, taking care that parts match.
Positioning detail
DS1092-146C
73
47
100
Dimensions in mm
70
8