Usb/Ipod; Connect A Usb Device - Kenwood KMM-BT728HD Mode D'emploi

(for /
Radio
)
[TI] [ON]: Allows the unit to temporarily switch to Traffic Information if
available ("TI" indicator lights up). ; [OFF]: Cancels.
[PTY SEARCH]
(For
Select the available Program Type (for Radio Broadcast Data System, see
page 40), then press S / T to start.
(For
1 Turn the volume knob to select the available Program Type (for Radio
Data System, see page 40), then press the knob.
2 Turn the volume knob to select the PTY language ([ENGLISH]/
[FRENCH]/[GERMAN]), then press the knob.
3 Press S / T to start searching.
[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Broadcast Data System/
Radio Data System station time. ; [OFF]: Cancels.
• [MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH] is selectable only
when the band is FM1/FM2/FM3.
• If the volume is adjusted during reception of traffic information or news
bulletin, the adjusted volume is memorized automatically. It will be applied
the next time traffic information or news bulletin is turned on.
/ /
/ /
)
)
/

USB/iPod

Connect a USB device

USB input terminal
/
from the rear of the unit (USB input terminal).
The source changes to USB FRONT/USB REAR/USB automatically and
playback starts.
Connect an iPod/iPhone
USB input terminal
from the rear of the unit (USB input terminal).
The source changes to iPod FRONT/iPod REAR/iPod USB automatically and
playback starts.
• You can also connect iPod/iPhone via Bluetooth. (Page 22)
*1 Do not leave the cable inside the car when not in use.
*2 KCA-iP103: Lightning type
CA-U1EX (max.: 500 mA)
(optional accessory)*1
/ : You can also connect to the USB cable
KCA-iP103 (optional accessory)*2
or accessory of the iPod/iPhone*1
/ : You can also connect to the USB cable
USB device
iPod/
iPhone
11
ENGLISH