Aiwa HV-FX9000U Mode D'emploi page 14

Connecting the VCR (continued)
CATV connections
To connect a CATV system without using a CATV converter
3
AC cord
1
Connect the cable from the CATV system to the AERIAL connector on this
VCR.
2
Connect the supplied antenna cable to the RF OUT connector on the VCR
and the antenna connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
3
Connect the AC cord to the AC outlet.
To connect a CATV system using a CATV converter
4
AC cord
1
Connect the cable from the CATV system to the input connector on the CATV converter.
2
Connect the output connector on the converter to the AERIAL connector on this VCR.
3
Connect the supplied antenna cable to the RF OUT connector on the VCR and the antenna
connector on your TV.
If your TV has a 300-ohm antenna connector, use an antenna splitter (not supplied).
4
Connect the AC cord to the AC outlet.
5
ENGLISH
To AC outlet
To AC outlet
CATV system
75-ohm coaxial cable
(not supplied)
1
AERIAL
2
(VHF/UHF)
RF OUT
Antenna cable
(supplied)
To antenna connector
CATV system
75-ohm
coaxial cable
(not supplied)
AERIAL
3
(VHF/UHF)
RF OUT
Antenna cable
(supplied)
To antenna connector
Antenna splitter (not supplied)
TV
UHF
To UHF antenna terminal
IN
1
75-ohm coaxial cable
(not supplied)
Antenna splitter
(not supplied)
TV
TV
VHF
300-ohm 75-ohm
To VHF antenna
terminal
CATV converter
(not supplied)
OUT
2
TV
UHF VHF
300-ohm 75-ohm