Being Awakened; Other Functions; Change Temperature Unit - ADE CK 1702 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38
4. Press ALARM.
The minute indicator for the alarm time blinks on the display.
5. Using the UP and DOWN buttons, set the desired alarm minute.
6. Finally, press ALARM to end the procedure.

Being awakened

At the set time you will be woken by an alarm signal, which will become more intense
as the waking time increases.
Interrupting the alarm for 24 hours
− Press the UP, DOWN or WAVE buttons to interrupt the alarm.
After 24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off automatically after 2 minutes. After
24 hours, the alarm will be triggered again.
Repeat alarm (snooze function)
− Press the SNOOZE button once when the alarm signal sounds.
The alarm signal is cut off and the bell symbol and z
After 5 minutes, the device switches on again and wakes you up again.
This procedure can be repeated multiple times.
Switching the alarm function off and on
Starting from normal time display:
− Press the ALARM button once.
Once the alarm symbol goes out, the alarm function is deactivated and you will not
be alarmed any more. Pressing ALARM again reactivates the alarm function.

Other functions

Change temperature unit

− Press the DOWN button to display the temperature in °Celsius or °Fahrenheit.
DCF Radio-controlled clock CK 1702
Other functions
are blinking on the display.
Z
23

Publicité

Table des Matières
loading

Table des Matières