Technical Specification - Phottix Mitros TTL Flash Manuel D'utilisation

INSTRUCTION MANUAL
En

Technical Specification

Modes: TTL , Manual, and Multi Stroboscopic
Guide No.: 58/190 (at 105mm focal length, ISO 100 in meters/feet)
Flash coverage: 17-105mm (14mm with wide angle diffuser panel)
Auto zoom (Flash coverage automatically adjusts to match the lens focal
length)
Manual zoom (Zoom can be adjusted by changing setting on the flash/cam-
era)
Rotation: 360 degrees, Up-Down: -7 to 90 degrees.
FEC (Flash exposure compensation): Manual
Sync modes: First Curtain Sync, Rear Curtain Sync, and High Speed Sync
Stroboscopic flash: 1-100Hz
Flash exposure confirmation: Blue LED lamp lights up in TTL mode
Flash Recycling (with size-AA alkaline batteries)
Recycling time/Flash-ready indicator:
Normal flash: Approx.0.1-5 sec./Red LED indicator lamp lights up.
Quick flash: Approx.0.1-2.5 sec./Green LED indicator lamp lights up.
Internal power: Four size-AA alkaline batteries or size-AA Ni-MH batteries
External battery: Compatible with Phottix Battery Pack and Nikon High-Per-
formance Battery Pack SD-9 through specific adapter
Power saving: Non-wireless slave modes: 90 seconds, Wireless slave mode: 60
minutes
Wireless flash
Transmission method: Optical pulse
Channels: 4
Wireless options: OFF, Master, Slave and Optical Slave
Transmission range (Approx.): (Indoors:12-16m/39.36-52.48 ft., Outdoors:
7-9m/22.96-29.52 ft)
Reception angle: ±40°(horizontal), ±30°(vertical)
Controlled slave groups: 3 (A, B, and C)
Standby current: ≤100uA in sleep mode
Dimensions: (L x W x H): 202.8×77.5×58.3 mm
Weight (Approx.): 427g (flash only, excluding batteries)
www.phottix.com
13