Bosch Sensixx'x Di90 EasyComfort Notice D'utilisation page 17

"i-Temp" technology
This technology sets an appropriate combination of
temperature and steam, which is suitable for all fabrics that
can be ironed (symbols
The "i-Temp" technology does not apply to fabrics that
cannot be ironed (symbol
Please check the garment care label for details or try ironing
on a part of the fabric not visible normally.
3. "SensorSteam" function
After the initial heating, "SensorSteam" function switches off
the iron when it is left unattended, thus increasing security
and saving energy.
1 While the handle is gripped, the iron heats up. The
"SensorSteam" indicator lamp (2) will remain lit
continuously.
2 When the handle is released, the "SensorSteam"
function is activated. The "SensorSteam" indicator lamp
(2) will flash.
4. Steam settings
This iron generates steam by means of a built-in motor. While
the motor is working, the "MotorSteam" indicator lamps (14)
of the water tank come on.
The iron is equipped with a sensor so that the steam is
generated only while ironing in a horizontal position. Thus,
unnecessary steam production is avoided.
The steam mode can be selected by pressing the "SET"
button (3) successively. The iron runs through the following
cycle:
Steam mode
Medium
(continuous steam)
Maximum
(continuous steam)
Dry ironing
(ironing without steam)
Steam production can be controlled manually for steam
ironing only when necessary. Select dry ironing mode and
press the motor activation trigger (1).
).
).
Indicator lamp (4)
"eco"
(green)
"max"
(red)
off
17
BOS CH