6.5
Rigging the 8XT or 12XT enclosure with the OMNIMOUNT
Four predrilled inserts located on the rear face of the 8XT and 12XT enclosures allow for mounting the
®
OMNIMOUNT
rigging accessories.
Remove the four screws (they will be employed for fixing the rigging accessory) from the four predrilled inserts and
follow the mounting instructions (provided by the OMNIMOUNT
•
OMNIMOUNT
•
OMNIMOUNT
L-ACOUSTICS recommends using an additional safety point when rigging enclosures.
!
A safety eye-bolt accessory can be added using the M8* insert located on the rear face of the
enclosure (see Figure 19).
WARNING
* The "M8" notation refers to the European standard (see applicable external documentation).
XTP_RM_ML_1.1
Figure 19: Inserts on the 12XT enclosure
®
30.0 SERIES mounting accessories for the 8XT enclosure,
®
120.0 SERIES mounting accessories for the 12XT enclosure.
w w w . l - a c o u s t i c s . c o m
®
accessories
Safety insert for safety
eye-bolt accessory
Four predrilled inserts
for OMNIMOUNT
®
mounting accessory
®
manufacturer) regarding the:
EN
21 en