AKG CK 55 Mode D'emploi page 10

2.2 Connecting via MPA III L
Refer to fig. 1.
1. Push the mini XLR connector (1) on
the microphone cable into the mini
XLR socket (2) on the cable of the
MPA III L (3) to the stop.
The connector will lock auto-
matically.
To disconnect the cable, press the
unlocking button on the mini XLR
connector (1) and pull the connector
(1) out of the socket.
Important: To avoid damaging the
cable, never try to pull out the
cable itself!
10
CK 55 Mini XLR
Fig. 1: Connection diagram with optional MPA III L.
2. Connect the MPA III L (3) to a bal-
anced XLR microphone input with
phantom power.
3. Switch the phantom power on.
Mini XLR MPA
(Refer to the instruction manual of
the unit to which you connected
your microphone.)