Erasing Tracks - Eagletone DPW 400 Guide De L'utilisateur

can adjust the metronome's beat pattern and tempo as usual before recording. However, these cannot be
changed during recording.
Note 1 : The metronome sound will not be recorded
Note 2 : If one track has been recorded, when recording another track, its tempo and beat pattern will
follow the setting of the first track recorded. If you change the tempo at this point, the new tempo will
be applied to both tracks. The beat pattern cannot be changed.
2. Record : If the TRACK 1 or TRACK 2 buttons are selected and blinking, the recording will begin as soon
as you play on the keyboard or press the PLAY/STOP button.
3. While recording, the recording track indicator keeps blinking and the REC indicator is lit solid.
4. Stop recording : Press on the PLAY/STOP button, the REC button or the recording track button to stop
recording. The REC indicator turns off and the recorded track indicator is lit solid to show the track now
contains data.
NOTE :
When the record memory is full, recording will stop automatically and «FUL» will appear on the LED
display.
PLAYBACK
1. LThe Track LED indicators will show which tracks contain recorded data. If you do not wish to hear one
of the two tracks, press the corresponding TRACK button to turn that track off. Its LED indicator will turn off
2. Press the PLAY/STOP button to listen to the recorded track(s). The PLAY indicator lights up and the beat
indicators will flash per the beat pattern and tempo.
You can change the tempo of your recorded track by pressing the TEMPO button while the recording is
being played back.
You may also accompany the recorded tracks on the keyboard while the recording is playing back.
Note : sIf the metronome is turned on before pressing the PLAY/STOP button to play back the recorded music,
the metronome will sound with proper tempo and beat pattern used during your recording. When the playback
stops, the metronome will return to its original setting.
Press the PLAY/STOP button to stop the playback.
Playback will also stop automatically when the recording reaches its end.

ERASING TRACKS

To erase the music recorded on the tracks :
1. Press and hold the REC button down.
2. Press the track button that you wish to erase while you continue to hold down the REC button. This will
immediately erase the existing data from your previous recording.
3. Relâchez le bouton REC (les témoins de piste et REC clignotent)
4. Press the track button again (the indicators will go off ).
5. Repeat steps 1 through 4 until all the desired tracks are erased.
14