Eagletone DPW 400 Guide De L'utilisateur page 25

• Do not attempt to open the piano or make any change in the circuits or parts of the unit.
HANDLING AND TRANSPORT
• Never apply excessive force to the controls, connectors or other parts of the instrument.
• Always unplug cables by gripping the plug firmly and not by pulling on the cable.
• Disconnect all cables before moving the instrument.
• Physical shocks caused by dropping, bumping or placing heavy objects on the instrument can result in
scratches and/or more serious damage.
• Check carefully the amplifier's volume control before starting to play. Excessive volume can cause per-
manent hearing loss.
CLEANING
• Clean the cabinet and panel with a soft nonabrasive dry cloth. Do not use any paint thinner or petroche-
mical-based polishes.
• To maintain the luster on the keys and buttons, wipe with a clean, slightly damp cloth, and then polish
with a soft dry cloth
LOCATION
Do not expose the instrument to the following conditions to avoid deformation, discoloration or more
serious damage :
• direct sunlight (near a window);
• high temperatures (near a heat source, outside or near a window);
• excessive humidity;
• excessive dust;
• strong vibration.
• Leave enough space around the piano for it to be properly ventilated.
• This instrument contains digital circuitry and may cause interference if placed too close to radio or televi-
sion receivers. If interference occurs, move the instrument further away from the affected equipment.
• Avoid placing vinyl objects on top of the instrument, vinyl can stick to and discolor the surface.
POWER
• Turn the power switch off when the instrument is not in use.
• To avoid damage to the instrument and other devices to which it is connected, turn the power switches
of all related devices off prior to connection or disconnection of MIDI cables.
• Turn the power off if the main cable is damaged or the instrument is spattered with liquid.
• Do not switch the unit on and off in quick succession, this places an undue load on the electronic com-
ponents.
• Unplug the AC power cord during an electrical storm.
• Avoid plugging the AC power cord into the same AC outlet as appliances with high power consumption,
such as electric heaters or refrigerators
3