Tempo; Recording - Eagletone DPW 400 Guide De L'utilisateur

Note : Reverb and chorus sound effects are not applied to the metronome sound.
Press the TEMPO button to enter the tempo setting mode; its indicator blinks. The display shows the current
tempo value (120 by default) followed by a dot mark. Use the ▲ and ▼ buttons to change the tempo value,
ranging from 40 to 240. Press simultaneously the ▲ and ▼ buttons to recall the default tempo (120). If you
press and hold down the ▲ or ▼, button, the tempo will change continuously until the button is released.
If you press any button except ▲/▼ or if there is no manipulation for 3 seconds once the setting up is
finished, the display returns to the voice selection mode and shows the master voice..
The DPW 400 digital piano Overture features a two track recorder that enables you to record what you play
on the keyboard and then play it back. Two tracks mean that you can «overdub» one part on top of another,
using a different voice if you like.
The recorder feature is a useful addition to any keyboard study program since it allows you to hear exactly
how you sound from the listener's perspective. It can also be just plain fun. This recorded information is
nonvolatile and therefore will not be lost when the power is turned off. The 2 tracks can play back separa-
tely or together as a complete song. The record function records all settings exactly as you selected and
performed them.
STEPS FOR RECORDING
1. Get prepared : Get ready to record by setting the voice, tempo, reverb level or other parameters as
desired
2. Select a track : There are two tracks available for recording. The tracks are assigned by engaging the
TRACK 1 and TRACK 2 buttons
3. Press and hold down the REC button, then press the track button that you want to record in. The corres-
ponding track indicator and the REC indicator will blink and the four dots of the beat indicator will blink in
accordance with the current tempo selection to show that the recorder is on standby.
NOTE 1 :
The contents of a track will be erased as soon as you select that track for recording.
NOTE 2 :
sIf you have already recorded on the other track, its track indicator will also be lit and the recorded
music will play as a reference for you while you record the new track. If you do not wish for the previously recorded
track to play while you are recording, press the corresponding track button to turn the indicator light off.
1. Metronome : Press the METRONOME button to enable the metronome as a reference, if so desired. The
four beat indicators flash, the metronome sounds without any beat pattern, only giving the tempo. You

TEMPO

RECORDING

13