Harman CROWN XLS Série Manuel D'utilisation page 28

XLS Specifications
page 28
–20 Indicator: Green LED flashes when output signal level exceeds –20 dB below clip.
–10 Indicator: Green LED flashes when output signal exceeds –10 dB below clip.
Clip Indicators: Two red LEDs, one for each channel, illuminate when the channel's output is being overdriven.
Thermal Indicator: Two red LEDs, one for each channel, illuminate when thermal compression begins.
Input/Output
Input Connectors: XLR (one per channel), ¼ inch (one per channel), and RCA (one per channel). ¼ inch connectors can be
used as loop-thrus to distribute signal to additional amplifiers.
Output Connectors: Two 4-Pole Speakon
The Channel 1 Speakon connector is wired for both channels so it can be used for bridge-mono wiring or for stereo wiring of
®
two speakers to a single Speakon
®
One pair of back-panel binding posts per channel; accepts banana plugs or bare wire.
(European models do not accept banana plugs.)
Protection
XLS Series amplifiers provide extensive Protection, including output current limiting, DC protection, circuit breaker,
and thermal protection.
Construction
Ventilation: Flow-through ventilation from front to back.
Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation.
Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³).
Dimensions: EIA Standard 19-inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-inch (8.9-cm) height.
XLS 1000/XLS 1500: 8.12-Inch (20.62cm) depth
XLS 2000/XLS 2500: 10.35-Inch (26.29cm) depth
Weight
Net Weight:
XLS 1000: 8.6 lb (3.9kg)
XLS 1500: 8.6 lb (3.9kg)
XLS 2000: 10.8 lb (4.9kg)
XLS 2500: 10.8 lb (4.9kg)
Shipping Weight:
XLS 1000: 13.6 lb (6.2 kg)
XLS 1500: 13.6 lb (6.2 kg)
XLS 2000: 15.8 lb (7.1 kg)
XLS 2500: 15.8 lb (7.1 kg)
Output Connectors accept 2-pole or 4-pole Speakon
®
connector.
XLS Series Power Amplifiers
connectors.
®
Operation Manual