Q & A - Panasonic AU-XPD3 P2 Mode D'emploi

Q & A
n Cards other than P2 cards cannot be used.
Î The P2 drive is designed for P2 cards and does not support cards other than P2
cards.
n P2 cards cannot be accessed after resume from sleep or hibernation.
Î Some personal computers may not be able to access a P2 card in the P2 drive
after resuming from sleep or hibernation. Should this happen, reconnect the
Thunderbolt 3 Cable.
n When a P2 card is inserted, the access indicator flashes green
continuously and the P2 card is unusable.
Î The P2 card may be unformatted.
Format the P2 card.
n When a P2 card is removed, the access indicator lights orange
continuously and does not turn off.
Î The P2 drive may have disconnected from the personal computer.
Unplug the Thunderbolt 3 cable and plug it in again.
n The access indicator blinks slowly (about 1-second intervals) in red and
does not turn off.
Î The fan requires replacement. Contact your dealer for more information.
n The fan does not spin.
Î The fan only spins when the P2 drive's internal temperature is high.
E-16