Making Connections - 3M ReLoad SRL Mode D'emploi

Mode d'emploi • Instrucciones de usuario •

1.2.3 Making connections:

It is the user's responsibility to ensure that the correct connector is used for the intended application, by
making sure that all of the connectors are compatible with each other in size, shape and strength.
WARNING!
Always ensure all connectors are correctly engaged and locked. Do not use combinations
of components or subsystems that may affect or interfere with the safe function of each
other.
3M approved connectors (snap hooks and carabiners) are designed to be used only as they are specified in
the relevant product's user instructions.
Figure 2—Inappropriate anchorage connections
A
C
WARNING!
A. Never connect to a D-ring where another connector has already been attached.
B. Never link connectors together.
C. Never connect in a way that would load the gate of the carabiner or hook.
D. Ensure the anchor point does not obstruct or prevent the connector gate from
closing.
E. Never connect in such a way that may result in unintentional disengagement (See
Section 1.2.2).
D
29
User instructions
B
E