List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PBSG 95 D5 Instructions D'utilisation Et Consignes De Sécurité

List of pictograms used

Read the instruction manual.
Wear hearing protection.
Wear a dust mask.
Protection class II
(double insulation)
Drill bit sharpener

Introduction

We congratulate you on the purchase of your
new product. You have chosen a high qual-
ity product. The instructions for use are part
of the product. They contain important infor-
mation concerning safety, use and disposal.
Before using the product, please familiarise
yourself with all of the safety information and
instructions for use. Only use the product as
described and for the specified applications.
If you pass the product on to anyone else,
please ensure that you also pass on all the
documentation with it.

Intended use

This product is intended for sharpening steel
drill bits according to DIN 338, DIN 340,
DIN 345, DIN 1869 and DIN 1897 (style
16 GB/IE
Wear eye protection.
Wear protective, slip-resistant
footwear.
Wear protective gloves.
Risk of electric shock! Unplug
the mains plug from the socket
prior to performing mainte-
nance or repairs.
Type N). Carbide drills must not be sharp-
ened. Any other use or modification of the
product shall be considered as improper use
and could give rise to considerable dangers.
The manufacturer assumes no liability for
damages due to improper use. Not intended
for commercial use.

Parts description

Dial ("STONE" = brick)
1
Brick cover
2
Screw, brick cover
3
ON / OFF switch
4
Brick
5
Metal ring
6
Screw connection
7
Brick holder
8
Spring
9
Louvres
10
Drill guide
11