Mitsubishi Electric Mr.SLIM PKA-RP HAL Série Manuel D'utilisation page 11

This timer begins countdown when the air conditioner starts and shuts
the air conditioner off when the set time has elapsed.
Available settings run from 30 minutes to 4 hours in 30-minute intervals.
Note:
is in effect.
AFTER
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
AFTER
1. Be sure that you are at a standard control screen, and that the Auto
Off timer indicator is visible in the display (at
When something other than the Auto Off Timer is displayed, set it to
AUTO OFF TIMER using the function selection of remote controller
(see 8.[4]-3 (3)) timer function setting.
2. Hold down the Timer Menu button
Up" appears on the screen (at
(Note that each press of the button toggles the display between "Set
Up" and "Monitor".)
3. Press the appropriate Set Time button
time (at ).
4. Press the Filter button to lock in the setting.
Note:
pressing the Filter .
5. Press the Mode (Return) button
and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown
immediately.
rectly on the display.
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at
2. Hold down the Timer Menu button
is indicated on the screen (at
• The timer remaining to shutdown appears at
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button .
OFF
AUTO OFF
ON/OFF
FILTER
CHECK TEST
OPERATION CLEAR
Timer Setting
OFF
AUTO OFF
).
for so that the "Set
).
as necessary to set the OFF
to complete the setting procedure
Timer Setting
OFF
AUTO OFF
).
1
for so that "Monitor"
).
.
Hold down the Timer On/Off button
Off" appears (at ) and the timer value (at
C
-
Alternatively, turn off the air conditioner itself. The timer value (at
-
will disappear from the screen.
Hold down the Timer On/Off button
indication disappears (at
play (at ).
Alternatively, turn on the air conditioner. The timer value will appear at
.
Press the AUTO STOP or AUTO START
• Time can be set while the following symbol is blinking.
OFF timer : is blinking.
ON timer : is blinking.
h min
Use the and
Canceling the timer.
-
To cancel the OFF timer, press the
To cancel the ON timer, press the
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
for so that "Timer
) disappears.
C
AUTO OFF
AUTO OFF
for . The "Timer Off"
), and the timer setting comes on the dis-
AFTER OFF
C
C
AUTO OFF
button (TIMER SET).
buttons to set the desired time.
AUTO STOP
button.
AUTO START button.
)
11