Battery Operation - Duux DXCF14 Mode D'emploi

Battery operation

Note: In battery mode the fan speed is
limited to position 15. Depending on the
settings, the battery will last max.12 hours.
Lower the ventilation speed and activate
night mode to increase battery life. See below
comparison chart for reference:
Fan speed Oscillation
Off
1
Horizontal or Vertical
Horizontal & Vertical
Off
5
Horizontal or Vertical
Horizontal & Vertical
Off
10
Horizontal or Vertical
Horizontal & Vertical
Off
15
Horizontal or Vertical
Horizontal & Vertical
* For reference only. Test environment conditions: 21,5⁰C, 35% humidity.
14
Battery life*
12:00 H
07:30 H
05:00 H
10:00 H
Regular wind
06:00 H
04:10 H
Natural wind
08:00 H
04:30 H
03:20 H
Temperature
06:00 H
03:00 H
02:30 H
Operating instructions
Assemble the fan according to chapter
1
"Installing the product" of this manual.
Plug the power adapter in an available power
socket and plug the connector into the base of
2
the product. The display will light up and show
the power icon.
Press the power button to turn the product on.
The fan will start in default setting or resume
3
operation according to the most recent setting.
Power button
mode
Night
mode mode
Horizontal
Oscilation
function
Timer Vertical
function oscilation
The control panel allows for two actions by
1
the user:
- pressing the control ring
- rotating the aluminum ring; both clockwise
and counter clockwise.
Rotate the ring to select different
2
functionalities. A flashing icon indicates what
mode or setting is currently selected. Press the
display to confirm the selected functionality.
Modes: Activate a mode by selecting the
3
corresponding icon and pressing to confirm.
Next, choose the desired wind speed by
rotating the ring and press to confirm.
Functions: Activate a function by selecting
4
the corresponding icon and press to confirm.
Next, choose the desired value (hours, angle
or degree Celsius) by rotating and pressing to
confirm. Deactivate a setting by selecting it first
and then pressing the control ring and holding
it for 3 seconds.
Flashing display: When setting a fan speed or
5
functionality, the display will flash to indicate
that you are making changes. The display will
stop flashing once a value has been confirmed
or when no input is received for 8 seconds.
15