Hewi 950.50.026XA Notice De Montage page 4

Important information
Purpose according to Directive 93/42/EEC
The HEWI floor support is an accessory for the HEWI support rail and serves to take the strain
off the wall fixing of the HEWI support rail.
Mounting information
Mounting only by persons familiar with mounting of the product and appropriate qualifications for
their activity. Ensure that the floor covering is suitable for the permanent use of the floor support
and able to withstand the load.
Warning and hazard notices
• Always unfold the floor support fully.
• The floor support must stand firmly on the floor.
• Improper mounting or use can lead to accidents involving serious injuries.
• The maximum static load of the support rail is not increased by using the floor support.
• In the event of damage, the floor support rail may only continue to be used following
inspection by a specialist company responsible for maintenance.
Care and cleaning instructions
HEWI products are easy-care. Generally speaking, an occasional wipe with a damp cloth
is enough. When using detergents, please observe the following:
• Only use detergents with a pH of between 6 and 8.
• Detergents containing active substances such as phosphates, soap and tensides may be used.
• Follow the detergent manufacturer's instructions (concentration, contact time).
• Detergents containing acids, alkalis, bleach or scouring agents may not be used.
• Do not use scouring cleaning equipment, such as brushes
Exclusion of liability
HEWI accepts no liability whatsoever for damage to persons or property that occurs or has
occurred as a result of improper mounting or maintenance, particularly if the safety instructions
and other points to note listed are not or have not been observed in full. HEWI accepts no
liability whatsoever for damage occurring from incorrect cleaning.
For further information, please contact HEWI Technical Support,
tel. +49 5691 82-300.
4 | HEWI