Sony Artisan GDM-C520K Guide De Démarrage Rapide page 4

Connecting the Artisan
Artisan Color
TM
Reference Sensor
1 Connect the USB end of the Artisan
computer, or connect it through a peripheral device such as a keyboard or USB hub.
Note: Make sure that the sensor can be placed easily over the center
of your display screen, without stretching the sensor's cord.
Attaching the Display Hood to your GDM-C520 Display
1
4
1 Unfold the hood.
2 Attach the hook and loop tabs to the underside of the display hood, as shown above.
3 Remove the liners protecting the adhesive on each hook and loop tab.
4 Wrap the hood around the display. Make sure that the hood is evenly aligned.
5 Fold the adhesive tabs inward the display, pressing firmly to ensure proper adhesion of the tabs to the underside of the display.
4
Sensor to your Computer
TM
Sensor to an open USB port on your
TM
2
Hook and loop tabs
1
USB jack
USB port
3
5