Charging The Power Pack - Hama PD-27W60 Mode D'emploi

Masquer les pouces Voir aussi pour PD-27W60:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
G Operating instruction
Controls and Displays
1. On/Off button
2. USB port
3. USB port
4. USB Type-C port IN/OUT (Power Delivery)
5. LED capacity indicator
6. USB Type-C cable
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please keep these
instructions in a safe place for future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• Power Pack 26800 mAh *, with Power Delivery
• USB Type-C to USB Type-C charging cable
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
• Keep this product, as all electrical products, out of the reach of children!
• Do not drop the product and do not expose it to any major shocks.
• Do not operate the product outside the power limits given in the specifications.
• Do not open the device or continue to operate it if it becomes damaged.
• Dispose of packaging material immediately according to locally applicable regulations.
• Since the battery is integrated and cannot be removed, you will need to dispose of the product as
a whole. Do this in compliance with the legal requirements.
• Do not modify the product in any way. Doing so voids the warranty.
Note – Power Delivery (PD)
To find out whether your terminal device supports Power Delivery (PD), please refer to the product
information or operating instructions of the device manufacturer or to information available on
the Internet.
4. Operation

4.1 Charging the Power Pack

• Begin charging the power pack by connecting the included USB Type-C charging cable to the power
pack's USB Type-C input (IN 5V/3A; 9V/2A; 12V/2A; 14.5V/1.5A; 20V/1.5A) and to a suitable
PD charger. Alternatively, you can charge the power pack using a USB-A to Type-C charging cable
and a suitable USB charger. Please refer to the operating instructions for the USB charger used.
2

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Trip00077484

Table des Matières