Vertical Steam Ironing - TEFAL PRO EXPRESS Notice D'emploi

Masquer les pouces Voir aussi pour PRO EXPRESS:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

6- WHEN THE RED LIGHT "WATER TANK EMPTY" COMES ON
There is no more steam. The removable water tank is empty
1. Remove the water tank and fill it up.
2. Ensure the water tank is replaced securely making sure it is fully pushed down `
and press the "restart" button located on the control panel to continue your
ironing.

7- VERTICAL STEAM IRONING

1. Set the iron thermostat and the steam output control dial (located on the control panel) to the MAX
position.
2. Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.
3. Holding the iron in a vertical position, tilted slightly forwards, press repeatedly on
the steam control button (under the iron handle) moving the iron from top to
bottom
.
10
Recommendations : for fabrics other than linen or cotton, hold the iron a few
centimetres from the garment to avoid burning the fabric.
8- TURBO STEAM FUNCTION (depending on the model)
Press 2 or 3 times on the turbo steam button to obtain a more powerful burst of steam
• for ironing thicker fabrics,
• to eliminate creases,
• for powerful vertical steaming.
Be careful : use the turbo steam function very carefully because of the
exceptional power of steam that may cause burns.
NOTE : continuous use of the turbo steam function will begin to cool the iron
and may cause water to drip from the iron. If this occcurs, stop using the turbo
steam function and allow the iron thermostat to reach temperature again
(thermostat light will come on and go off) before using this function again.
9- MAINTAINING YOUR STEAM GENERATOR
• Before cleaning, ensure that your steam generator is unplugged and that the sole plate and
the iron rest have cooled down.
• Do not use detergent or descaling products for cleaning the sole plate or the boiler.
• Never hold the iron or the base unit under the tap
• Do not place the iron on a metal rest as this could damage it.
Place it on the iron-rest on the base unit : it has non-slip pads and has been
designed to withstand high temperatures
1. Empty and rinse the removable water tank
2. Regularly clean the sole plate with a damp, non-metallic washing up pad.
3. Clean the plastic parts of the appliance occasionally with a soft cloth.
.
9
.
12
RESTART
9
10
:
11
11
12

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pro express turbo

Table des Matières