CHAFFOTEAUX SMART CONTROL LINK Instructions D'installation Et D'utilisation page 25

IMPORTANT!
When running the TC and TD procedures described below, it is best to
leave the default setting DHCP = ON unchanged.
The setting DHCP=OFF must be selected for networks configured in static IP mode.
6.1 Guided procedure for TELECONTROL (TC) with or without the
TELEASSISTANCE (TD) service
1. Open the app, login to your account and follow the guided procedure. The App for IOS/Apple
will ask if the product being configured is compatible with Apple HomeKit; you should confirm
that it is.
2. The product is properly connected to internet and registered if:
- the display indicates a successful connection to the router and internet
- the app displays a message confirming that the product has been registered.
- the display shows the basic screen with the "
3. You can now control your Chaffoteaux appliance remotely using the smartphone app or on
the web portal www.chaffolink.remotethermo.com.
IMPORTANT:
You can use Chaffolink with several devices at once: simply use the same credentials to log
in. The app includes an option for registering more than one SMART CONTROL LINK with
a single user account.
6.2 Browser-based procedure for TELEASSISTANCE (TD) without
TELECONTROL ( TC)
Open your smartphone's network settings and select «Remote Gw Thermo-XXXXXX».
• VIA APP: open the Chaffolink App, without logging in, and follow the
guided procedure.
• VIA BROWSER: open the web browser, enter 192.168.1.1 in the address bar,
select the wifi network and enter the password.
We recommend leaving the default settings unchanged
ANDROID
" icon steady
• The IOS operating system will
automatically suggest the next steps
required to connect the product to
the internet
IOS
EN / 25