CHAFFOTEAUX SMART CONTROL LINK Instructions D'installation Et D'utilisation page 23

Installing SMART CONTROL LINK and activating the Chaffolink services is quick and easy:
it takes just 3 steps!
SMART
CONTROL LINK
INSTALLATION
The term "Teleassistance" (TD) means the Technical Assistance Centre service, which pro-
vides all remote support functions. The term "Telecontrol" (TC) means the end user service for
monitoring and configuring the Chaffoteaux appliance with a smartphone app or web portal.
4. SMART CONTROL LINK INSTALLATION
The device detects the room temperature, therefore several factors should be taken into ac-
count when choosing an installation site. Position the device far from heat sources (radiators,
sunlight, fireplaces, etc.) and from draughts, doorways and windows which could affect the
temperature readings. It should be installed approximately 1.5 metres above the floor level.
WARNING!
Installation should be performed by a qualified technician.
Before making any connections, shut off electrical power to
the boiler with its external two-position switch.
Install the product in a room with a normal level of pollution.
- Secure the SMART CONTROL LINK base plate (A) to the wall
and connect the pair of wires to the terminal clamp to hook
the boiler up via the BUS.
- Fit the battery in its compartment (B).
- Restore SMART CONTROL LINK on its base plate (C) by
pushing it carefully downwards.
ACCOUNT
REGISTRATION
ON-LINE PRODUCT
REGISTRATION
A
B
C
EN / 23